Articles | Volume 4, issue 4
https://doi.org/10.5194/wes-4-595-2019
© Author(s) 2019. This work is distributed under
the Creative Commons Attribution 4.0 License.
the Creative Commons Attribution 4.0 License.
https://doi.org/10.5194/wes-4-595-2019
© Author(s) 2019. This work is distributed under
the Creative Commons Attribution 4.0 License.
the Creative Commons Attribution 4.0 License.
Research article
| 
11 Nov 2019
Research article |
| 11 Nov 2019
| 11 Nov 2019
System-level design studies for large rotors
Department of Electrical, Computer & Energy Engineering, University of Colorado Boulder, Boulder, CO 80309, USA
Gavin K. Ananda
Department of Aerospace Engineering, University of Illinois Urbana-Champaign, Champaign, IL 61820, USA
Mayank Chetan
Department of Mechanical Engineering, University of Texas at Dallas, Richardson, TX 75080, USA
Dana P. Martin
Department of Electrical Engineering, Colorado School of Mines, Golden, CO 80401, USA
Christopher J. Bay
National Wind Technology Center, National Renewable Energy Laboratory, Golden, CO 80401, USA
Kathryn E. Johnson
Department of Electrical Engineering, Colorado School of Mines, Golden, CO 80401, USA
National Wind Technology Center, National Renewable Energy Laboratory, Golden, CO 80401, USA
Eric Loth
Department of Mechanical and Aerospace Engineering, University of Virginia, Charlottesville, VA 22904, USA
D. Todd Griffith
Department of Mechanical Engineering, University of Texas at Dallas, Richardson, TX 75080, USA
Michael S. Selig
Department of Aerospace Engineering, University of Illinois Urbana-Champaign, Champaign, IL 61820, USA
Lucy Y. Pao
Department of Electrical, Computer & Energy Engineering, University of Colorado Boulder, Boulder, CO 80309, USA
Viewed
Total article views: 4,231 (including HTML, PDF, and XML)
Cumulative views and downloads
(calculated since 06 Feb 2019)
| HTML | XML | Total | BibTeX | EndNote | |
|---|---|---|---|---|---|
| 2,543 | 1,612 | 76 | 4,231 | 73 | 68 |
- HTML: 2,543
- PDF: 1,612
- XML: 76
- Total: 4,231
- BibTeX: 73
- EndNote: 68
Total article views: 2,543 (including HTML, PDF, and XML)
Cumulative views and downloads
(calculated since 11 Nov 2019)
| HTML | XML | Total | BibTeX | EndNote | |
|---|---|---|---|---|---|
| 1,877 | 605 | 61 | 2,543 | 59 | 56 |
- HTML: 1,877
- PDF: 605
- XML: 61
- Total: 2,543
- BibTeX: 59
- EndNote: 56
Total article views: 1,688 (including HTML, PDF, and XML)
Cumulative views and downloads
(calculated since 06 Feb 2019)
| HTML | XML | Total | BibTeX | EndNote | |
|---|---|---|---|---|---|
| 666 | 1,007 | 15 | 1,688 | 14 | 12 |
- HTML: 666
- PDF: 1,007
- XML: 15
- Total: 1,688
- BibTeX: 14
- EndNote: 12
Viewed (geographical distribution)
Total article views: 4,231 (including HTML, PDF, and XML)
Thereof 3,265 with geography defined
and 966 with unknown origin.
Total article views: 2,543 (including HTML, PDF, and XML)
Thereof 2,104 with geography defined
and 439 with unknown origin.
Total article views: 1,688 (including HTML, PDF, and XML)
Thereof 1,161 with geography defined
and 527 with unknown origin.
| Country | # | Views | % |
|---|
| Country | # | Views | % |
|---|
| Country | # | Views | % |
|---|
| Total: | 0 |
| HTML: | 0 |
| PDF: | 0 |
| XML: | 0 |
- 1
1
| Total: | 0 |
| HTML: | 0 |
| PDF: | 0 |
| XML: | 0 |
- 1
1
| Total: | 0 |
| HTML: | 0 |
| PDF: | 0 |
| XML: | 0 |
- 1
1
Cited
21 citations as recorded by crossref.
- The effect of a speed exclusion zone and active tower dampers on an upwind fixed-hub two-bladed 20 MW wind turbine F. Anstock & V. Schorbach 10.1088/1742-6596/2018/1/012003
- Progressive structural scaling of a 20 MW two-bladed offshore wind turbine rotor blade examined by finite element analyses M. Schütt et al. 10.1088/1742-6596/1618/5/052017
- Influence of tower shadow on downwind flexible rotors: Field tests and simulations J. Simpson et al. 10.1002/we.2703
- Gravo-aeroelastically-scaled demonstrator field tests to represent blade response of a flexible extreme-scale downwind turbine M. Kaminski et al. 10.1016/j.renene.2023.119217
- Design space exploration and decision‐making for a segmented ultralight morphing 50‐MW wind turbine S. Kianbakht et al. 10.1002/we.2781
- Validation of a 20 m Wind Turbine Blade Model C. Willberg et al. 10.3390/en14092451
- Control co-design of 13 MW downwind two-bladed rotors to achieve 25% reduction in levelized cost of wind energy L. Pao et al. 10.1016/j.arcontrol.2021.02.001
- Aero-structural design and optimization of 50 MW wind turbine with over 250-m blades S. Yao et al. 10.1177/0309524X211027355
- Downwind coning concept rotor for a 25 MW offshore wind turbine C. Qin et al. 10.1016/j.renene.2020.04.039
- Challenges, opportunities, and a research roadmap for downwind wind turbines P. Bortolotti et al. 10.1002/we.2676
- Field tests of a highly flexible downwind ultralight rotor to mimic a 13-MW turbine rotor E. Loth et al. 10.1088/1742-6596/2265/3/032031
- Grand challenges in the design, manufacture, and operation of future wind turbine systems P. Veers et al. 10.5194/wes-8-1071-2023
- A Dynamic Control Model of the Blades Position for the Vertical-Axis Wind Generator by a Program Method I. Stoyanov et al. 10.3390/inventions8050120
- Peridynamic Simulation of a Mixed-Mode Fracture Experiment in PMMA Utilizing an Adaptive-Time Stepping for an Explicit Solver C. Willberg et al. 10.1007/s42102-021-00079-6
- Constrained power reference control for wind turbines D. Zalkind et al. 10.1002/we.2705
- Structural design and optimization of a series of 13.2 MW downwind rotors S. Yao et al. 10.1177/0309524X20984164
- Open-Loop Control Co-Design of Semisubmersible Floating Offshore Wind Turbines Using Linear Parameter-Varying Models A. Sundarrajan et al. 10.1115/1.4063969
- Flutter behavior of highly flexible blades for two- and three-bladed wind turbines M. Chetan et al. 10.5194/wes-7-1731-2022
- Aero-structural rapid screening of new design concepts for offshore wind turbines A. Escalera Mendoza et al. 10.1016/j.renene.2023.119519
- Redesign of an upwind rotor for a downwind configuration: design changes and cost evaluation G. Wanke et al. 10.5194/wes-6-203-2021
- Active rotor coning for a 25 MW downwind offshore wind turbine C. Qin et al. 10.1088/1742-6596/2265/3/032022
21 citations as recorded by crossref.
- The effect of a speed exclusion zone and active tower dampers on an upwind fixed-hub two-bladed 20 MW wind turbine F. Anstock & V. Schorbach 10.1088/1742-6596/2018/1/012003
- Progressive structural scaling of a 20 MW two-bladed offshore wind turbine rotor blade examined by finite element analyses M. Schütt et al. 10.1088/1742-6596/1618/5/052017
- Influence of tower shadow on downwind flexible rotors: Field tests and simulations J. Simpson et al. 10.1002/we.2703
- Gravo-aeroelastically-scaled demonstrator field tests to represent blade response of a flexible extreme-scale downwind turbine M. Kaminski et al. 10.1016/j.renene.2023.119217
- Design space exploration and decision‐making for a segmented ultralight morphing 50‐MW wind turbine S. Kianbakht et al. 10.1002/we.2781
- Validation of a 20 m Wind Turbine Blade Model C. Willberg et al. 10.3390/en14092451
- Control co-design of 13 MW downwind two-bladed rotors to achieve 25% reduction in levelized cost of wind energy L. Pao et al. 10.1016/j.arcontrol.2021.02.001
- Aero-structural design and optimization of 50 MW wind turbine with over 250-m blades S. Yao et al. 10.1177/0309524X211027355
- Downwind coning concept rotor for a 25 MW offshore wind turbine C. Qin et al. 10.1016/j.renene.2020.04.039
- Challenges, opportunities, and a research roadmap for downwind wind turbines P. Bortolotti et al. 10.1002/we.2676
- Field tests of a highly flexible downwind ultralight rotor to mimic a 13-MW turbine rotor E. Loth et al. 10.1088/1742-6596/2265/3/032031
- Grand challenges in the design, manufacture, and operation of future wind turbine systems P. Veers et al. 10.5194/wes-8-1071-2023
- A Dynamic Control Model of the Blades Position for the Vertical-Axis Wind Generator by a Program Method I. Stoyanov et al. 10.3390/inventions8050120
- Peridynamic Simulation of a Mixed-Mode Fracture Experiment in PMMA Utilizing an Adaptive-Time Stepping for an Explicit Solver C. Willberg et al. 10.1007/s42102-021-00079-6
- Constrained power reference control for wind turbines D. Zalkind et al. 10.1002/we.2705
- Structural design and optimization of a series of 13.2 MW downwind rotors S. Yao et al. 10.1177/0309524X20984164
- Open-Loop Control Co-Design of Semisubmersible Floating Offshore Wind Turbines Using Linear Parameter-Varying Models A. Sundarrajan et al. 10.1115/1.4063969
- Flutter behavior of highly flexible blades for two- and three-bladed wind turbines M. Chetan et al. 10.5194/wes-7-1731-2022
- Aero-structural rapid screening of new design concepts for offshore wind turbines A. Escalera Mendoza et al. 10.1016/j.renene.2023.119519
- Redesign of an upwind rotor for a downwind configuration: design changes and cost evaluation G. Wanke et al. 10.5194/wes-6-203-2021
- Active rotor coning for a 25 MW downwind offshore wind turbine C. Qin et al. 10.1088/1742-6596/2265/3/032022
Latest update: 19 Apr 2024
Short summary
We present a model that both (1) reduces the computational effort involved in analyzing design trade-offs and (2) provides a qualitative understanding of the root cause of fatigue and extreme structural loads for wind turbine components from the blades to the tower base. We use this model in conjunction with design loads from high-fidelity simulations to analyze and compare the trade-offs between power capture and structural loading for large rotor concepts.
We present a model that both (1) reduces the computational effort involved in analyzing design...
Altmetrics
Final-revised paper
Preprint